01 - 440C
KNIFE MAKING KIT 1
The wood in the picture may vary. Picture for illustration purposes only
Custom Knife Kit 1
Bearing the A Finlay Logo
1 X Full Tang Blade Blank in 440C Steel
approx 220mm Long
30mm at the widest
4mm thick
already predrilled
The handle area is approx 110mm
2 X 4mm Brass Pins
1 X 6mm Brass Lanyard Loop
2 X 2mm Glue Channels
2 part epoxy resin
1 Hardwood Block or 2 Scales (wood types will vary depending on stock)
The different types of wood are shown below on the finished knives
Your kit will contain one of them
Enough leather for sheath
Leather glue, 6ft thread and 2 needles
Full instructions
This kit has the hard work done on the blade
What you will need to do is to bond and pin your handle material,
shape, sand and seal it, polish your cutting edge if you wish,
make your sheath and start using,
The picture above shows a selection of finished knives
AFKMK081371FC
Price: £79.99 handle wood (scales) from stock